How To Reset Playstation 3 Video Settings

Video Output Settings

Adjust the system's video output settings. Select the best output settings for the Goggle box in use.

Check the resolution supported by your TV.
Resolution (video mode) varies depending on the Television receiver type. For details, refer to the instructions supplied with the TV.

Select (Settings) > (Display Settings).

Select [Video Output Settings].

iv.

Select the connector type on your Television set.
Resolution (video manner) varies depending on the blazon of connector used.

Cable type	Input connector on the TV	*Supported video modes 1**
HDMI Cable (sold separately)	HDMI	NTSC: 1080p / 1080i / 720p / 480p PAL: 1080p / 1080i / 720p / 576p
Component AV Cable (sold separately) D-Last Cable (sold separately)	Component D-Last *2	NTSC: 1080p / 1080i / 720p / 480p / 480i PAL: 1080p / 1080i / 720p / 576p / 576i
AV Cablevision (supplied) Southward VIDEO Cable (sold separately)	Composite S Video*3	NTSC: 480i PAL: 576i
AV MULTI Cable (sold separately) ［VMC-AVM250］ (a Sony Corporation product) AV Cable (supplied) Euro-AV Connector Plug (supplied) *four	AV MULTIfive SCART6	NTSC: 480p / 480i PAL: 576p / 576i

*1	The video mode options vary depending on the region where the PS3™ system was purchased. In Northward America, Asia and other NTSC regions, 480i video style is displayed as [Standard (NTSC)]. In Europe and other PAL regions, 576i video mode is displayed as [Standard (PAL)]. For details, refer to the instructions supplied with the production.
*two	D-final is a connector type used mainly in Japan. The resolutions supported by D1 to D5 are every bit follows: D5: 1080p / 720p / 1080i / 480p / 480i D4: 1080i / 720p / 480p / 480i D3: 1080i / 480p / 480i D2: 480p / 480i D1: 480i
*3	Due south VIDEO is a format mainly used in Japan.
*4	The Euro-AV connector plug is included merely with PS3™ systems sold in Europe.
*5	AV MULTI is a format mainly used in Japan. If [AV MULTI / SCART] is selected, the screen allowing you to select the type of output betoken volition be displayed.
*6	SCART is a format mainly used in Europe. If [AV MULTI / SCART] is selected, the screen assuasive you to select the type of output signal volition exist displayed.

five.

Fix the 3D TV brandish size.
Prepare the system to match the size of the screen of the TV you are using.
If the Television set you are using is not a 3D TV, or if you did not select [HDMI] in step 4, this screen volition non be displayed.

half dozen.

Change video output settings.
Alter the resolution for the video output. Depending on the connector blazon selected in stride 4, this screen may not be displayed.

vii.

Prepare the resolution.
Select all resolutions supported by the TV in use. Video volition automatically be output at the highest resolution possible for the content you are playing from among the selected resolutions.*
* The video resolution is selected in society of priority equally follows: 1080p > 1080i > 720p > 480p/576p > Standard (NTSC:480i/PAL:576i).

If [Composite / S Video] is selected in step 4, the screen for selecting resolutions will not be displayed.
If [HDMI] is selected, you can also select to automatically adjust the resolution (the HDMI device must be turned on). In this instance, the screen for selecting resolutions will non be displayed.

Gear up the TV type.
Select the type of Goggle box in use. Set when simply SD resolution (NTSC:480p / 480i, PAL: 576p / 576i) is to be output such as when [Composite / S Video] or [AV MULTI / SCART] is selected in pace 4.

Check your settings.
Ostend that the prototype displayed is at the correct resolution for the Tv. You tin can go dorsum to a previous screen and revise the settings past pressing the left button.

10.

Salve your settings.
The video output settings are saved on the PS3™ system. You can continue on to gear up audio output settings. For details on audio output, encounter (Settings) > (Sound Settings) > [Audio Output Settings] in this guide.

Hints

If the video output settings exercise not match those required for the Telly in use, the screen may become blank when the resolution is changed. The screen should, nonetheless, automatically become back to its original resolution after a while. If the screen remains bare for more than xxx seconds, turn off the system. Then touch the ability button on the system front for at to the lowest degree v seconds to turn the system on over again. The video output settings will automatically be reset to the standard resolution.
If a device that is not compatible with the HDCP (High-bandwidth Digital Content Protection) standard is connected to the arrangement using an HDMI cable, video and/or audio cannot exist output from the system.
Copyright-protected content on a Blu-ray Disc can only be output at 1080p when using an HDMI cable connected to a device that is uniform with the HDCP standard.
When the PS3™ system (CECH-3000 / 4000 series) is connected to a TV using a D-terminal cable, a component AV cable, or an multi AV cable (a Sony Corporation production), analogue high-definition output is restricted to comply with the copyright protection engineering used by Blu-ray™ (AACS). BD video software (BD-ROM) and BDs recorded with copyright-protected video content (such equally broadcast programs) are output at 480i.
Connect the organisation (CECH-4200 serial or later) using an HDMI cablevision to output BD video software (BD-ROM) and BDs recorded with copyright-protected video content.